English
| Quantity: | |
|---|---|
1. Product Introduction
Fluorocarbon paint is a coating mainly composed of fluororesin as the film-forming substance. This coating has many superior properties due to the introduction of highly electronegative fluorine elements and strong carbon fluorine bonds, such as weather resistance, heat resistance, low temperature resistance, chemical resistance, as well as unique non stick and low friction properties。The combination of fluorocarbon paint decorative panel and insulation material is called fluorocarbon paint insulation decorative integrated panel.Fluorocarbon paint is divided into two categories: metallic and solid colors.
Water in water has a smooth touch and no graininess
2. Product Features
Durable practicality, based on tetrafluoroethylene resin, with extremely high durability and UV resistance.
Super weather resistance, with a service life of over 20 years.
Super corrosion resistance, using multiple coatings, can resist corrosion from various media.
Highly decorative, with various metallic colors such as antique steel, volcanic ash, iron ash, platinum silver, diamond ash, red gold, violet, diamond ash, etc.
Simple maintenance, able to block the invasion of rainwater, scale, etc., easy to clean.
3. Technical standard
| Test items | Result | ||
| Physical mechanics property | Density | ≥ 1.4g/cm3 | |
| Water content | ≤ 10% | ||
| Water absorption | ≤ 28% | ||
| Water impermeability | The duration of the test shall be 24h, traces of moisture may appear on the under surface of the sheet , but in no instance shall there be any formation of drops of water | ||
| Impact resistance | The surface of sheet doesn't have penetrating crack when using once falling ball impact test | ||
| Bending strength | >16mpa | ||
| Freezing resistance | Without no crack and delamination after 25 times freeze thaw recycling test . | ||
| Incombustible | Gb8624 a grade | ||
| Radioactivity | Internal exposure index | ≤ 1.0ira | |
| External exposure index | ≤ 1.0iγ | ||
| Coating quality | Gloss deviation (60) | ≤ 10 | |
| Adhesive force ,level | ≤ 1 | ||
| Pencil hardness | ≥2h | ||
| Mortar resistance,24h | No changing | ||
| Water resistance,168h | No abnormalities | ||
| Acid-base resistance,168h | No abnormalities | ||
| Damp and hot resistance,1000h | No bubbles , no rust, no crack | ||
| Cold resistance of the heat cycle(ten times ) | No abnormalities | ||
| Pollution resistance | Pass | ||
| Dirt-pick up resistance | ≤ 10% | ||
| Rinsing resistance (times) | ≥10000 | ||
| Solvent(butanone) wiping test (times) | ≥100 | ||
| Solt fog resistance ,4000h | No bubbles , no rust, no crack | ||
| Artificial weathering aging resistance ,4000h | No bubbles , no falling off, no crack | ||
4. Product Color:
Rich variety of colors available for customization and selection
Installation method: Dragon bone installation
5. Application scenarios
Suitable for high-end office buildings, high-end residential buildings, government buildings, bank buildings, exhibition centers, office buildings, hotels, schools, hospitals, villas, etc
6. Workshop production line
Fully automated production line, ensuring quality and quantity to complete production, more efficient and convenient
7. Workshop production line
Fully automated production line, ensuring quality and quantity to complete production, more efficient and convenient
8. Certification qualifications
9. Q&A
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
Daniel / WhatsApp:+86 18561883970
1. Product Introduction
Fluorocarbon paint is a coating mainly composed of fluororesin as the film-forming substance. This coating has many superior properties due to the introduction of highly electronegative fluorine elements and strong carbon fluorine bonds, such as weather resistance, heat resistance, low temperature resistance, chemical resistance, as well as unique non stick and low friction properties。The combination of fluorocarbon paint decorative panel and insulation material is called fluorocarbon paint insulation decorative integrated panel.Fluorocarbon paint is divided into two categories: metallic and solid colors.
Water in water has a smooth touch and no graininess
2. Product Features
Durable practicality, based on tetrafluoroethylene resin, with extremely high durability and UV resistance.
Super weather resistance, with a service life of over 20 years.
Super corrosion resistance, using multiple coatings, can resist corrosion from various media.
Highly decorative, with various metallic colors such as antique steel, volcanic ash, iron ash, platinum silver, diamond ash, red gold, violet, diamond ash, etc.
Simple maintenance, able to block the invasion of rainwater, scale, etc., easy to clean.
3. Technical standard
| Test items | Result | ||
| Physical mechanics property | Density | ≥ 1.4g/cm3 | |
| Water content | ≤ 10% | ||
| Water absorption | ≤ 28% | ||
| Water impermeability | The duration of the test shall be 24h, traces of moisture may appear on the under surface of the sheet , but in no instance shall there be any formation of drops of water | ||
| Impact resistance | The surface of sheet doesn't have penetrating crack when using once falling ball impact test | ||
| Bending strength | >16mpa | ||
| Freezing resistance | Without no crack and delamination after 25 times freeze thaw recycling test . | ||
| Incombustible | Gb8624 a grade | ||
| Radioactivity | Internal exposure index | ≤ 1.0ira | |
| External exposure index | ≤ 1.0iγ | ||
| Coating quality | Gloss deviation (60) | ≤ 10 | |
| Adhesive force ,level | ≤ 1 | ||
| Pencil hardness | ≥2h | ||
| Mortar resistance,24h | No changing | ||
| Water resistance,168h | No abnormalities | ||
| Acid-base resistance,168h | No abnormalities | ||
| Damp and hot resistance,1000h | No bubbles , no rust, no crack | ||
| Cold resistance of the heat cycle(ten times ) | No abnormalities | ||
| Pollution resistance | Pass | ||
| Dirt-pick up resistance | ≤ 10% | ||
| Rinsing resistance (times) | ≥10000 | ||
| Solvent(butanone) wiping test (times) | ≥100 | ||
| Solt fog resistance ,4000h | No bubbles , no rust, no crack | ||
| Artificial weathering aging resistance ,4000h | No bubbles , no falling off, no crack | ||
4. Product Color:
Rich variety of colors available for customization and selection
Installation method: Dragon bone installation
5. Application scenarios
Suitable for high-end office buildings, high-end residential buildings, government buildings, bank buildings, exhibition centers, office buildings, hotels, schools, hospitals, villas, etc
6. Workshop production line
Fully automated production line, ensuring quality and quantity to complete production, more efficient and convenient
7. Workshop production line
Fully automated production line, ensuring quality and quantity to complete production, more efficient and convenient
8. Certification qualifications
9. Q&A
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
Daniel / WhatsApp:+86 18561883970
