English
| Quantity: | |
|---|---|
1、Solid color Board and wood grain:
Leader UV solid color and wood grain precoated board is a precoated board with different solid colors formed by surface treatment, color roller coating, and UV curing on the basis of inorganic board.
2、Product Color:
All colors can be customized without any color restrictions. It can be customized according to the building material standard color, and there may be slight color differences. If suggested, the color can be determined first, samples can be mailed, and the final color can be selected for production.
3、Product advantages:
Environmentally friendly and non-toxic: The substrate of UV monochrome coating board adopts asbestos free calcium silicate board as the substrate, which does not contain harmful substances and meets environmental standards, suitable for use in public places such as schools.
Strong UV resistance: The surface cured by UV light can effectively resist the exposure of sunlight and ultraviolet rays, avoiding color fading and surface damage.
Wear resistant and scratch resistant: With high surface hardness, it can effectively resist scratches and wear during daily use, maintaining a beautiful appearance.
Waterproof and moisture-proof: Its surface has good waterproof properties, suitable for humid environments, ensuring the durability and stability of school decoration.
Easy maintenance: The smooth surface makes daily cleaning and maintenance very easy, just wipe with clean water.
4、Antibacterial activity
No. | Test Item | Test Method | Technical Index | Test Result | Evaluation | |
1 | Density, kg/cm | GB/T 7019-2014 6 | - | 1.51 | -- | |
2 | Moisture Expansion Rate,% | GB/T7019-2014 | - | 0.08 | -- | |
3 | Flexural Strength, MPa (dry state) | GB/T 7019-2014 | 15.3 | -- | ||
4 | Gloss | GB/T 9754-2007 | - | 5.0~5.9 | --- | |
5 | Adhesion, level (Cutting spacing of 3mm) | GB/T 9286-2021 | - | 0 | -- | |
6 | Hardness | GB/T 6739-2022 | -- | 4H | -- | |
7 | Alcohol Resistant Wiping(100 times) | GB/T 23989-2009 | - | Pass (No substrate exposed) | - | |
8 | Wash ability (10000 times) | GB/T 9266-2009 | -- | Pass (No substrate exposed) | -- | |
9 | Radionuclide Limit(A category decorative materials) | IRa | GB 6566-2010 | ≤1.0 | 0.1 | PASS |
Ip | ≤1.3 | 0.2 | PASS | |||
10 | Formaldehyde Release limit, mg/m³ | GB 18580-2017 | ≤0.124 (Limit marking E) | 0.006 | PASS | |
11 | Antibacterial Performance,% | Escherichia Coli | GB/T21866-2008 | I level≥99.00 | 99.42 | PASS |
Staphylococcus Aureus | I level≥99.00 | 99.41 | PASS | |||
12 | Antimicrobial Durability,% | Escherichia Coli | GB/T21866-2008 | I level≥95.00 | 96.13 | PASS |
Staphylococcus Aureus | I level≥95.00 | 96.45 | PASS | |||
5、Applied range:
Indoor decoration projects for schools, hospitals, office buildings, residences,hotels,villas,etc
6、Installation method: adhesive method、Keel and anchor installation
7、Certifications
8. Production lines
9. Q&A
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
1、Solid color Board and wood grain:
Leader UV solid color and wood grain precoated board is a precoated board with different solid colors formed by surface treatment, color roller coating, and UV curing on the basis of inorganic board.
2、Product Color:
All colors can be customized without any color restrictions. It can be customized according to the building material standard color, and there may be slight color differences. If suggested, the color can be determined first, samples can be mailed, and the final color can be selected for production.
3、Product advantages:
Environmentally friendly and non-toxic: The substrate of UV monochrome coating board adopts asbestos free calcium silicate board as the substrate, which does not contain harmful substances and meets environmental standards, suitable for use in public places such as schools.
Strong UV resistance: The surface cured by UV light can effectively resist the exposure of sunlight and ultraviolet rays, avoiding color fading and surface damage.
Wear resistant and scratch resistant: With high surface hardness, it can effectively resist scratches and wear during daily use, maintaining a beautiful appearance.
Waterproof and moisture-proof: Its surface has good waterproof properties, suitable for humid environments, ensuring the durability and stability of school decoration.
Easy maintenance: The smooth surface makes daily cleaning and maintenance very easy, just wipe with clean water.
4、Antibacterial activity
No. | Test Item | Test Method | Technical Index | Test Result | Evaluation | |
1 | Density, kg/cm | GB/T 7019-2014 6 | - | 1.51 | -- | |
2 | Moisture Expansion Rate,% | GB/T7019-2014 | - | 0.08 | -- | |
3 | Flexural Strength, MPa (dry state) | GB/T 7019-2014 | 15.3 | -- | ||
4 | Gloss | GB/T 9754-2007 | - | 5.0~5.9 | --- | |
5 | Adhesion, level (Cutting spacing of 3mm) | GB/T 9286-2021 | - | 0 | -- | |
6 | Hardness | GB/T 6739-2022 | -- | 4H | -- | |
7 | Alcohol Resistant Wiping(100 times) | GB/T 23989-2009 | - | Pass (No substrate exposed) | - | |
8 | Wash ability (10000 times) | GB/T 9266-2009 | -- | Pass (No substrate exposed) | -- | |
9 | Radionuclide Limit(A category decorative materials) | IRa | GB 6566-2010 | ≤1.0 | 0.1 | PASS |
Ip | ≤1.3 | 0.2 | PASS | |||
10 | Formaldehyde Release limit, mg/m³ | GB 18580-2017 | ≤0.124 (Limit marking E) | 0.006 | PASS | |
11 | Antibacterial Performance,% | Escherichia Coli | GB/T21866-2008 | I level≥99.00 | 99.42 | PASS |
Staphylococcus Aureus | I level≥99.00 | 99.41 | PASS | |||
12 | Antimicrobial Durability,% | Escherichia Coli | GB/T21866-2008 | I level≥95.00 | 96.13 | PASS |
Staphylococcus Aureus | I level≥95.00 | 96.45 | PASS | |||
5、Applied range:
Indoor decoration projects for schools, hospitals, office buildings, residences,hotels,villas,etc
6、Installation method: adhesive method、Keel and anchor installation
7、Certifications
8. Production lines
9. Q&A
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
