English
| Quantity: | |
|---|---|
Leader
681099
1. Product description
Pre-coated boards use leader inorganic boards as substrates, with surface finished and coated by means of rolling, sprinkling, spraying, laminating, cladding, transfer, etc. to form interior wall decorative boards that can be directly installed and used
Pre-coated boards include interior wall and exterior wall decorative boards. Interior wall panel products include solid color boards, transfer boards, skin-touch matte boards, lamination boards, and cladding boards. Exterior wall panels include real stone paint, water-in-water, and sand-in-water products.
2. Technical standard
Attribute parameters | Performance index |
Wet expansion rate | ≤0.25% |
Water absorption rate | ≤30% |
Moisture content | ≤10% |
Thermal conductivity | ≤0.35W/(m.k) |
Impermeability | 24 hours, no water droplets |
Flexural resistance (saturated strength) | ≥13MPa |
Impact resistance strength | ≥1.4kJ/m2 |
Radioactivity | Internal irradiation index: IRa:0.2 External irradiation index Ir:0.2 |
Asbestos | 100% asbestos free |
Formaldehyde release amount | 0 |
Non combustibility | 240 minutes |
Combustion performance level | A2 |
Frost resistance | No cracking or delamination occurred after 25 freeze-thaw cycles |
Surface adhesion (grid method) | Level 0 |
Gloss | Range: 2.4~2.5 |
Alkali resistance | No abnormalities such as bubbles, protrusions, powdering, etc., color difference ∆ E=1.5 |
Resistant to nitric acid | No abnormalities such as bubbling, protrusion, powdering, etc., color difference ∆ E=0.7 |
Solvent resistance (butanone) | Not revealing the bottom |
Pencil hardness | 8H |
Water resistance | 360 hours without any color loss, discoloration, blistering, wrinkling, peeling, rusting or other phenomena |
Wash ability | Wash 11000 times without revealing the bottom |
Dirt collection | 8.3 |
Resistant to artificial climate aging | 1000h without peeling, cracking, bubbling, discoloration level 0, powdering level 0 |
Antibacterial performance - Escherichia coli ATCC 25922 | Level I |
Antibacterial performance - Staphylococcus aureus ATCC 6538 | Level I |
Antibacterial durability performance - Escherichia coli ATCC 25922 | Level I |
Antibacterial durability performance - Staphylococcus aureus ATCC 6538 | Level I |
Anti-fungal performance | Level I |
Anti-fungal durability performance | Level I |
Characteristic | Advantages of waterproof, fireproof, moisture-proof, sound-absorbing, high flexural strength, easy installation, environmental protection, etc. |
3. Production Lines
4. Quality certificates
5. FAQ
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
1. Product description
Pre-coated boards use leader inorganic boards as substrates, with surface finished and coated by means of rolling, sprinkling, spraying, laminating, cladding, transfer, etc. to form interior wall decorative boards that can be directly installed and used
Pre-coated boards include interior wall and exterior wall decorative boards. Interior wall panel products include solid color boards, transfer boards, skin-touch matte boards, lamination boards, and cladding boards. Exterior wall panels include real stone paint, water-in-water, and sand-in-water products.
2. Technical standard
Attribute parameters | Performance index |
Wet expansion rate | ≤0.25% |
Water absorption rate | ≤30% |
Moisture content | ≤10% |
Thermal conductivity | ≤0.35W/(m.k) |
Impermeability | 24 hours, no water droplets |
Flexural resistance (saturated strength) | ≥13MPa |
Impact resistance strength | ≥1.4kJ/m2 |
Radioactivity | Internal irradiation index: IRa:0.2 External irradiation index Ir:0.2 |
Asbestos | 100% asbestos free |
Formaldehyde release amount | 0 |
Non combustibility | 240 minutes |
Combustion performance level | A2 |
Frost resistance | No cracking or delamination occurred after 25 freeze-thaw cycles |
Surface adhesion (grid method) | Level 0 |
Gloss | Range: 2.4~2.5 |
Alkali resistance | No abnormalities such as bubbles, protrusions, powdering, etc., color difference ∆ E=1.5 |
Resistant to nitric acid | No abnormalities such as bubbling, protrusion, powdering, etc., color difference ∆ E=0.7 |
Solvent resistance (butanone) | Not revealing the bottom |
Pencil hardness | 8H |
Water resistance | 360 hours without any color loss, discoloration, blistering, wrinkling, peeling, rusting or other phenomena |
Wash ability | Wash 11000 times without revealing the bottom |
Dirt collection | 8.3 |
Resistant to artificial climate aging | 1000h without peeling, cracking, bubbling, discoloration level 0, powdering level 0 |
Antibacterial performance - Escherichia coli ATCC 25922 | Level I |
Antibacterial performance - Staphylococcus aureus ATCC 6538 | Level I |
Antibacterial durability performance - Escherichia coli ATCC 25922 | Level I |
Antibacterial durability performance - Staphylococcus aureus ATCC 6538 | Level I |
Anti-fungal performance | Level I |
Anti-fungal durability performance | Level I |
Characteristic | Advantages of waterproof, fireproof, moisture-proof, sound-absorbing, high flexural strength, easy installation, environmental protection, etc. |
3. Production Lines
4. Quality certificates
5. FAQ
Q1: Are you a manufacture or trader?
A2: We are truly a manufacturer, plant located in Qingdao with a total investment amount $140million, we not only can provide the high quality products with the competitive price, but also can offer the best pre-sale service and after-service.
Q2: How can you control your quality?
A2: For each production processing, Leader Group has complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be issued along with that batch of goods.
Q3: What is your lead time?
A3: It usually needs about 10- 15 days after confirmation of your deposit payment.
Specific time depends on order items and quantity.
Q4: What is your term of delivery?
A4: We accept EXW, FOB, CFR, CIF, CPT, CIP etc. Choose the one which is the most convenient or cost effective for you.
Q5: Do you provide free samples?
A5: Yes, free samples are available, generally speaking, the buyer shall bear all the delivery cost.
Q6: Can you manufacture products according to sample?
A6: Yes, We can produce by your sample or technical drawing.
We have R&D team, we can also help to develop new molds and texture.
Q7: What is your payments terms?
A7: We prefer 30% deposit, 70% balance before loading and delivery to the port, or by the LC, or other negotiable payment terms. We will show you photos and packages when loading materials into containers.
Q8: Can we visit your company?
A8: Yes, for sure, you are welcome to visit Leader Group Company.
Q9: What standards do you have?
A9: Our products meet the standards, such as ISO、ASTM/ANSI、EN、AS/NZS、GB/T、JC/T etc. The third party testing is all available for us.
Any other questions, welcome to contact online or by email to move on. We believe in Leader’s products will lead your perfect lifestyle.
